13th Middle East Corrosion Conference and Exhibition (13MECC) 2010 14-17 February 2010 Gulf International Convention Centre, Gulf Hotel, Kingdom of Bahrain Abstracts Acceptance Notification- 25th June 2009 Draft Paper Due- 14th September, 2009 Paper Review - 19th October 2009 Papers final version due - 23rd November, 2009 Power Point Presentation due - 20th January, 2010


Platinum Sponsors
                              

Accepted Abstracts (as of June 28, 2009)

|Cathodic Protection|Chemical Treatment|Corrosion Management|
Corrosion Research and Modeling|Materials Selection, Failure Analysis and Welding|
Non-Metallic Materials|Protective Coatings|Water Treatment & Chemical Cleaning|
Students Posters | Plenary Lectures|Workshops|

CATHODIC PROTECTION

References Author Affiliation Paper Title

87-CP-01

Saad Hamad Al-Khaldi et al

Kuwait National Petroleum Company, Kuwait

Revamping of Existing Cathodic Protection System in KNPC Shuaiba Refinery
11-CP-02 Sami Masadeh Al-Balqa Applied University, Jordan Computer Application in Pipeline Cathodic Protection Design
93-CP-03 Fawzi Ali Mohamed El Hamshri et al SOGEPI s.r.l. Libya Effects of High Potential Cathodic Protection on Fusion Bonded Epoxy Coated Steel
25-CP-05 S. Ali Asghari et al Razi Metallurgical Research Center, Iran Preparation and Characterization of Ternary Mixed Oxide Containing IrO2, RuO2, TiO2 on Platinum Coated Titanium Electrodes
61-CP-06 Calvin R. Pynn Aegis Technical Systems LLC, UAE Current Distribution in Reinforced Concrete Cathodic Protection Systems
63-CP-08 Abdulhameed  Bukhamseen Saudi Aramco, Saudi Arabia Providing an Accurate Field Measurements for a  Pipeline System will lead to a Robust and Sound CP Design
78-CP-09 Alireza Salehi et al Iran Oil Design & Construction Company, Iran A New Surveillance System for Cathodic Protection Monitoring of Oil & Gas Pipelines Using Data Grid
79-CP-10 Pankaj Panchal Abdulla Fouad Impalloy Ltd. Co., Saudi Arabia Cathodic Protection Design Consideration for Multiple Well Casings
99-CP-11 Zia Chaudhary et al SABIC, Saudi Arabia Repairs and Cathodic Protection of a Newly Built Reinforced Concrete Seawater Cooling Tower
114-CP-12 John Norris et al Corrpro Arabia, Saudi Arabia A Study of Reference Electrode Testing and Alternate Monitoring Methods for CP of Reinforced Concrete
142-CP-13 Faisal Al-Anazi SABIC, Saudi Arabia Failure Analysis of a Caustic Tank Bottom Protected by Impressed Current Cathodic Protection
159-CP-14 Hasan Sabri et al Kuwait Oil Company, Kuwait Applicability of In-Direct Inspection (IDI) in Congested Oilfield Area
161-CP-15 Hasan Sabri et al Kuwait Oil Company, Kuwait Cathodic Protection Approach in Upstream Processing Plant
162-CP-16 Hasan Sabri et al Kuwait Oil Company, Kuwait Factors Affecting Cathodic Disbondment Testing
163-CP-17 Hasan Sabri et al Kuwait Oil Company, Kuwait Impressed Current Cathodic Protection for External Bottom Plates of Large AST – Design Versus Factual Model
167-CP-18 Antonio Martinez ADMA, UAE Offshore Cathodic Protection Systems: Statistical and Experiences in the Arabian Gulf
175-CP-19 Mohammed Alghafri PDO, Oman Experience of PDO in Well Casing Cathodic Protection
188-CP-20 Mehdi Javidi et al Shiraz University, Iran External Corrosion Direct Assessment - A Case Study for a Gas Transmission Pipeline in South of Iran
190-CP-21 Chris J. Wheatley et al CJ Wiretech Limited, UK Thermal Spraying of AlZnIn Alloys Using Solid Wires
02-CP-23 Brent McAdams FreeWave Technologies, Inc., USA Implementing Remote Wireless Monitoring of Pipeline Integrity and Cathodic Protection
  ^ Top

CHEMICAL TREATMENT

References Author Affiliation Paper Title
08-CT-01 Dr. Mohamed Abou Zour Nalco, Abu Dhabi, UAE From the Lab to the Field- Development and Deployment of Combination Corrosion Inhibitor/Cleaner Technology
26-CT-02 Mohsen Achour ConocoPhillips, USA Effects of Corrosion Inhibitors and Surface Coverage on the Pipeline Wall Wettability in Crude Oil Systems
72-CT-05 Xianming Yu Saudi Aramco, Saudi Arabia Application of Vapor Phase Corrosion Inhibitors to Mitigate Underside Corrosion of Crude Oil Tank Bottoms
75-CT-06 Ali Al-Taq et al Saudi Aramco, Saudi Arabia Effect of Acid Hydrolysis on Inhibition Performance of a New Series of Diamine-based Corrosion Inhibitors for HCl Acid Solutions
88-CT-07 Sherif M. El-Sayed King Saud University, Saudi Arabia Effects of 3-Amino-5-mercapto-1,2,4-triazole on the Inhibition of Copper Corrosion in Highly saline Water
96-CT-09 Ahmed Y. Musa et al Universiti Kebangsaan Malaysia Mild Steel Corrosion Inhibition by 4, 4-Dimethyl-3-Thiosemicarbazide in 2.5M Sulfuric Acid
102-CT-11 Fahad Al-Abeedi Saudi Aramco, Saudi Arabia Sea Water Injection Pipelines Treatment Program
112-CT-12 Mohamed Abdelraouf et al Egyptian Petroleum Research Institute, Egypt Environmentally Friendly Corrosion Inhibitor Based on Green Tea Extract for Petroleum Pipelines
132-CT-13 Xinming Hu et al University of Leeds, UK Corrosion Performance of Carbon Steel under Downhole Conditions in a Formation Water with Addition of Different Oilfield Chemicals
151-CT-15 Cheolho Kang DNV, USA The Performance of Corrosion Inhibitors in Closed to Wellhead Flowlines
154-CT-16 Andrew MacDonald Clariant Oil Services UK Ltd, UK Evaluation of Corrosion Inhibitor and Kinetic Hydrate Inhibitor Compatibility Using Persistency and Partitioning Tests
156-CT-17 F. Setta et al University of Leeds, UK Efficiency Assessment of Conventional and Non-conventional Inhibitors on CaCO3 Precipitation Kinetics in the Bulk and Deposition on Stainless Steel Surface (316 L)
173-CT-19 Jessi Meyer et al Cortec, USA Performance of Migrating Corrosion Inhibitors in the Construction Industry
186-CT-20 Hanaa Al-Mazeedi Kuwait Institute for Scientific Research, KISR, Kuwait Inhibitors Evaluation for Carbon Steel in Minagish Aquifer Water
198-CT-21 Fengting Li Tongji University, China Study on Corrosion Inhibition of Polyaspartic Acid on Carbon Steel
199-CT-22 Layla Al Juhaiman King Saud University,Saudi Arabia PVP Polymer as a Corrosion Inhibitor for C Steel in HCL Solutions
218-CT-24 Shaikh Asrof Ali et al King Fahd University of Petroleum & Minerals, Saudi Arabia The Effects of Structural Variation in Some New Bisquaternary Ammonium Salts on the Corrosion Inhibition of Mild Steel in Acidic Media
  ^ Top

CORROSION MANAGEMENT

References Author Affiliation Paper Title
04-CM-01 Geir Instanes ClampOn AS, Norway Corrosion Erosion Monitoring
05-CM-02 Dr. Ali Morshed Production Services Network (PSN), Advanced Integrity Group (AIG), UK Corrosion Engineering vs. Corrosion Management in the Oil Industry
14-CM-03 Ahmad S. Al-Omari Saudi Aramco, Saudi Arabia Corrosion Monitoring & Chemical Injection Points: What Can Go Wrong and What Must Go Right!
20-CM-05 Colin Drysdale et al T.D. Williamson, Inc., USA Gauging the Success of Corrosion Inhibitor Application
21-CM-06 Colin Drysdale et al

 T.D. Williamson, Inc., USA High Performance Pigging
203-CM-07 George Duggan et al Baker Petrolite Saudi Co. Ltd., Saudi Arabia Case Study: Salt Corrosion Controlled by Discontinuing Water
212-CM-08 Robin D. Tems Saudi Aramco, Saudi Arabia Managing the Cost of Corrosion
36-CM-09 Iain Le May Metallurgical Consulting Services Ltd, Scotland Corrosion Analysis of Steel Pipes to be used in a Water Injection System
37-CM-10 Yahya J. Al-Shahrani Saudi Aramco, Saudi Arabia Premature Failure of a Newly Installed Bypass Line
41-CM-12 Michel Bonis Total, France Sour Weight Loss Corrosion: From a Better Knowledge to an Improved Management
43-CM-13 Mohammed Al-Barout Saudi Aramco, Saudi Arabia Mitigation of Crude Line Leaks: Case Study
44-CM-14 Kjell Wold et al Roxar Flow Measurement AS, Norway On-line, Non-intrusive Corrosion Monitoring based on Electric Field Signature Technology – an Update of Installation Experience and Typical Field Data
45-CM-15 Kjell Wold et al Roxar Flow Measurement AS, Norway New Sand Management System Integrating Erosion based and Acoustic Sensors in a New Generation Sand Management Software
50-CM-16 Moufaq Jafar et al Saudi Aramco, Saudi Arabia Real-Time Downhole Corrosion Monitoring
52-CM-17 Faisal H Al-Refai Kuwait National Petroleum Company Kuwait Failure of Fractionator Overhead Crude Exchangers in Crude Distillation Unit (CDU) in MAB Refinery
60-CM-18 Ahmad M Ghamdi Saudi Aramco, Saudi Arabia JR Amine Unit Corrosion Evaluation
77-CM-21 Martin Holdefer Pepperl+Fuchs GmbH, Germany No Chance for Corrosion - Online Corrosion Monitoring
19-CM-22 Colin Drysdale et al T.D. Williamson Inc., USA Black Powder Removal in a Gas Pipeline
95-CM-23 Michael Moles et al

 Olympus NDT, Canada Corrosion Mapping Capabilities using Phased Arrays
105-CM-24 Kyle Cattanach et al Baker Hughes, USA Novel Test Procedures to Understand and Mitigate Black Powder Formation in sales Gas Pipelines
117-CM-26 Mansour Al-Abbas et al Petrokemya, Saudi Arabia Corrosion Under Insulation (CUI) - a Unique Experience
129-CM-28 Howard Chiang Aramco Services Company, USA Establish Baseline Parameters for Furnace Inspection
140-CM-29 Øystein Baltzersen Sensorlink, Norway Ultrasonic System for Monitoring of Corrosion in Real Time
149-CM-31 Sajid Mehmood et al Saudi Aramco, Saudi Arabia Wellbore Corrosion Assessment in Water Wells - Causes and Prevention
155-CM-32 John Carew et al KISR, Kuwait Assessment of Corrosion in Seawater Injection System
170-CM-34 M.A.Al-Hujeli Saudi Aramco, Saudi Arabia Transfer Pumps Rich Corrosion Products
171-CM-35 A. Qumairi SWCC, Saudi Arabia The Phenomena of Corrosion Affect all Industrial Sectors

176-CM-36 Hassan Ali Al-Hammadi ADMA,UAE Integrity Assessment and Corrosion Management of Subsea Pipelines in the Arabian Gulf
201-CM-37 Jasim Al-Qurain et al Saudi Aramco, Saudi Arabia Corrosion Mitigation Measures Due to the Presence of Elemental Sulfur and Glycol Degradation Products at Abqaiq Deethanizer System
230-CM-38 Nabeel S. Al-Bannai et al

 Saudi Aramco, Saudi Arabia Corrosion Management Program Development at Saudi Aramco
  ^ Top

CORROSION RESEARCH AND MODELING

References Author Affiliation Paper Title
107-CR-01 Jagadeesh Bhattarai
 Tribhuvan University, Nepal Roles of Alloying Elements on the Passivation Behavior of Sputter-deposited Cr-Zr-W Alloys in 12 M HCl Solution
16-CR-02 Vahid Afshari et al University of Tehran, Iran The Influence of Nanostructured Surface on the Stability of the Passive Film on Iron in Nitric Acid Solution
34-CR-03 Dr. Ali Abdulgader Al Jarany Misurata, Libya Effect of Oxygen Partial Pressure on the Oxidation Behaviour of γ-TiAl Intermetallic at High Temperature
48-CR-04 Pejman Malekinejad Iranian Central Oil fields Company, Iran Studying the Performance of API 5CTL-80 Type 1 Steel in Tubing of Sour Gas Wells Using HYSIS Software
54-CR-05 Lutfi Abosrra University of Bradford, UK Effect of Surface Roughness on Corrosion Resistance of 316L Stainless Steel in Sodium Chloride saline Solutions
56-CR-07 Mohammed I. Abdulsalam King Abdulaziz University, Saudi Arabia Study of Crevice Corrosion on Type 254 SMO Stainless Steel in Chloride Solutions
82-CR-09 M. A. Fazal University of Malaya, Malaysia Comparative Corrosive Characteristic of Petroleum Diesel and Palm Biodiesel
115-CR-10 Dr. Husin Sitepu Saudi Aramco Comparative Evaluation of Cobalt and Copper Tubes using X-ray Diffraction Data for Black Powder in Sales Gas Transport Systems
119-CR-11 Rihan Omar Rihan et al KFUPM, Saudi Arabia The Effect of Soft-Start in Reducing Erosion-Corrosion Attack in Petroleum Pipelines in Carbon Dioxide Containing Solution
121-CR-12 Nawaf Al-Baker et al KFUPM, Saudi Arabia Kinetic Study of N211 Corrosion Inhibitors for CS-1018 in Seawater
127-CR-13 Irfan Aziz et al Beijing University of Aeronautics and Astronautics, China Cerium based Thermal Conversion Treatments on SiCp/2009 Aluminum Metal Matrix Composites
128-CR-14 Fadi samir Oudah et al American University of Sharjah, UAE Evaluation of the Effect of CFRP on the Corrosion Process of Reinforced Concrete Elements
131-CR-15 Xinming Hu et al University of Leeds, UK Erosion-Corrosion Performance and Mitigation of Materials for Multiphase Pipelines
134-CR-17 Mokhtar Che Ismail et al Universiti Teknologi Petronas, Malaysia The Effect of Surface Finish on Corrosion of Carbon Steel
135-CR-18 Mokhtar Che Ismail et al Universiti Teknologi Petronas, Malaysia Correlating Stern Geary Values with Film Formation in CO2 Corrosion
137-CR-19 Shouwen Shen et al Saudi Aramco, Saudi Arabia Chemical Composition Determination of Black Powder samples by XRD and XRF
150-CR-20 Raja Rizwan Hussain et al King Saud University, Saudi Arabia Effect of Volume of Coarse Aggregate on Corrosion Rate and Potential of Corroding Steel Reinforcement in Concrete Structures
153-CR-21 Zuhair Gasem KFUPM, Saudi Arabia Monitoring Localized Corrosion Using Acoustic Emission Technique
120-CR-22 Rihan Omar Rihan KFUPM, Saudi Arabia The Galvanic Corrosion Behavior of Electric Resistance Welded Petroleum Pipelines in Carbon Dioxide Containing Solution
181-CR-23 Hesam Ahmadi et al Petroleum University of Technology, Iran Electrochemical Investigation of Carbon Dioxide Corrosion of Carbon Steel in the Presence of Acetic Acid
182-CR-24 Masoud Azarmi et al Petroleum University of Technology, Iran Electrochemical Investigation of Molybdate as a Corrosion Inhibitor in Cooling Water Systems
193-CR-26 F.A. Abd El-Aleem et al King Saud University, Saudi Arabia Corrosion Problems and Materials Selection for Phosphoric Acid Production from Saudi Phosphate Ores
196-CR-27 Tumi Elmendlsi Academy for Postgraduate Studies, Libya Role of Sensitization on Pitting Corrosion of 304 Austenitic Stainless Steel in Seawater
197-CR-28 El-sayed M. Sherif King Saud University, Saudi Arabia Influence of Ruthenium Additions on the Passivation of 22%Cr 9%Ni 3%Mo Duplex Stainless Steel Corrosion in 10% Sulphuric Acid Solutions
205-CR-29 Mansour A. Al-Zamil et al Saudi Aramco, Saudi Arabia Corrosion Control in Vacuum Distillation Units
206-CR-30 Sameerah Al-Saeedi et al Princess Nora bint Abdulrahman University, Saudi Arabia Atmospheric Corrosion of Aluminum Using Quartz Crystal Microbalance
35-CR-31 Hameed H. Al-Badairy Saudi Aramco, Saudi Arabia The Roles of Impurities, RE Effects and Protective Coating on the Oxidation Behaviour of Fe-20Cr-5Al Alumina Forming Alloys
17-CR-32 Vahid Afshari et al University of Tehran, Iran Investigation of Grain Size on the Corrosion Inhibitor Behavior of Nanocrystalline Iron Metal
57-CR-33 Irfan Aziz Beijing University, China Corrosion Behavior of the SiCp/5A06 Al Composite Coated by Lanthanum-based Chemical Conversion Treatment
125-CR-34 Tsanka Dikova et al Medical University of Varna, Bulgaria Destruction of 316Ti Steel under High Temperature Gas Corrosion
126-CR-35 Tsanka Dikova et al Medical University of Varna, Bulgaria Properties Variation of Titanium Tubes After Long Term Use
136-CR-36 Abdulhameed Al-Hashem et al

 Kuwait National Petroleum Company, Kuwait Cavitation Erosion Behavior of Cobalt-Based Alloys in Seawater
141-CR-37 Kashif Naveed et al Institute of Space Technology Islamabad, Pakistan Effect of Intermetallics on Localized Corrosion of 2024 Aluminum Alloy
214-CR-38 Lutfi Abosrra et al School of Engineering, University of Bradford, UK Effect of Calcium Nitrite Inhibitor on Mild Steel Corrosion in Alkaline Containing Chloride Environment
  ^ Top

 

MATERIALS SELECTION, FAILURE ANALYSIS AND WELDING

References Author Affiliation Paper Title

204-MS-01

Peter Bukovinszky

HIDD Power Company BSC, Bahrain

Corrosion of Ni-resist D2 materials in Seawater and Details How to Repair the Defective Components

03-MS-02

Mohammed A. Al-Anezi et al

Saudi Aramco,Saudi Arabia

Pitfalls in Procurement of HIC Resistant Pipes
12-MS-03 Esmaeil Jafari et al Shiraz University, Iran The Influence of Plastic Deformation on Corrosion Behaviors of 304 AISI Stainless Steel
28-MS-04 Khalid M. Al-Hydary SABIC - Ibn Rushd, Saudi Arabia Effect of Interlock Protection System on Silos & Screw Conveyor Failures
29-MS-05 Khalid M. Al-Hydary SABIC - Ibn Rushd, Saudi Arabia Effect of Uneven Distribution of Heat on Huge Cycler Reactors
30-MS-06 A.M. Benamer Sirte Oil Company, Libya 34" Gas Pipeline Rehabilitation Methodology
68-MS-07 Darwin Sebayang et al

 Universiti Tun Hussein Onn, Malaysia Systematic Investigation of Failure Analysis on a Steam Trap Bypass Tube in a Coal Fired Power Plant
71-MS-08 Faisal H. Al-Refai et al Kuwait National Petroleum Company, Kuwait Failure of Sulfur Storage Tank in Mina Abdulla Refinery due to Corrosion Under Insulation
74-MS-09 Salman Al-Dossary et al Saudi Aramco, Saudi Arabia Underdeposit Corrosion Failure of a Compressor after Stage Cooler at an NGL Plant - A Case Study
10-MS-10 V. K. Bafna et al TCR Engineering Services Pvt. Ltd., India In-Situ Metallography for the Plant Health Assessment Studies and Failure Investigation
89-MS-11 Hosni M. Ezuber University of Bahrain, Bahrain Metallurgical and Environmental Factors Affecting the Pitting Behavior of SAF 2205 Duplex Stainless Steel in Chloride Solutions
90-MS-12 Ali H. Al Shawaf et al SABIC, Saudi Arabia Failure Analysis of a Pump Shaft
91-MS-13 Ali H. Al Shawaf et al SABIC, Saudi Arabia Investigation of Leakage from the Thermowell Weld Joint at an Ammonia Plant
92-MS-14 Ali H. Al Shawaf et al SABIC, Saudi Arabia Failure Analysis of 2"Globe Valve in a Utility Area
94-MS-15 H. J. Choi Saudi Aramco, Saudi Arabia Field Sweet and Sour Corrosion of Downhole T-95 Carbon Steel Production Tubing in Jauf and Kuff Gas Wells

 

 

Michael Moles et al Olympus NDT, Canada Corroded Bolt Inspection Using Phased Arrays
100-MS-17 L. Reddy et al Kuwait National Petroleum Company, Kuwait Use of Brass Hammers in Petroleum Refinery - Failure Investigation
101-MS-18 L. Reddy et al Kuwait National Petroleum Company, Kuwait Stress Corrosion Cracking of Pump Seal Flush Cooler Coils (SS316L) in Open Recirculation Water
108-MS-19 Chi-Ming Lee TWI Ltd, UK Corrosion Resistant Alloys – Improved Approach to Material Selection and Environmental Limits
111-MS-20 Maslat Al-Waranbi et al Saudi Aramco, Saudi Arabia MIC Role in Internal Corrosion Failures of Seal Flush Piping - Case Study
116-MS-22 Saeed Ahmed Aseery et al Petrokemya, Saudi Arabia Inspection Experience with Millisecond Furnaces
122-MS-24 Saad Al- Dhafiri et al Kuwait National Petroleum Company, Kuwait Dew Point Corrosion of a Transition Cone of an FCCU Regenerator – A Case Study
123-MS-25 Saad Al- Dhafiri et al Kuwait National Petroleum Company, Kuwait Erosion Corrosion of SS316L Trays in FCC’s Sour Water Stripper – A Case Study
124-MS-26 Saad Al- Dhafiri et al Kuwait National Petroleum Company, Kuwait Underdeposit Corrosion of Hydrocracker Effluent Heat Exchanger Tubes (Breech Lock Type)
130-MS-29 Xinming Hu et al University of Leeds, UK Cavitation Corrosion of Materials for Pumping Application in Artificial Seawater
138-MS-31 Moavin Islam et al Corrpro/KOC, Kuwait Stress Oriented Hydrogen Induced Cracking (SOHIC)Failure in a Crude Oil Pipeline Fitting
139-MS-32 Moavin Islam et al Corrpro/KOC, Kuwait Premature Failure of Drill Collars During Rigging Operation
157-MS-35 Sang Gyu Lee Samsung Engineering Co. Ltd., Korea Failure Analysis of 90-10 Cupronickel Generator Tube in Absorption Chiller
160-MS-36 Shuji Hashizume Tenaris NKK Tubes, Japan SCC Mechanism Near Fusion Line of Low C - 13%Cr Welded Joints
168-MS-37 Khaled Hussein Said et al ADMA-OPCO, UAE Case History: Damage of 30 inch Subsea Pipeline in the Arabian Gulf
169-MS-38 Mohammed Saleem Saudi Aramco, Saudi Arabia Environmental Cracking Assessment Challenges in Gas Processing Plant
173-MS-39 W. T. Riad et al KISR, Kuwait Failure Investigation of Pipe to Elbow Joint of Stainless Steel Drain Pipe
177-MS-40 Ruchuan Yin et al SABIC Technology Center, Saudi Arabia Failure Analysis of the 4th Catalyst Bed and Gratings Collapse in a Methanol Reactor
180-MS-41 Anees U. Malik et al Saline Water Conversion Corp. (SWCC), Saudi Arabia Studies on the Failure of Economizer Tubes Involving Acid Dew-Point Corrosion in High Pressure Boilers
202-MS-43 Dr. Mark J Gore Smith InnerArmor Technologies, USA Corrosion and Wear Resistant PECVD Coatings for the Internal Coating of Pipes
207-MS-44 Faraj Hammad Omer Ras Lanuf Oil & Gas Processing Co., Libya Rupture of Boiler Superheater
31-MS-45 Nayef Al-Enezi Kuwait National Petroleum Company, Kuwait Identification and Investigation of Corrosion Problems in MEA Systems
226-MS-47

Min Hyun Cho et al

POSCO, Korea

Evaluation of API X60 HSAW Pipe Resistance to Hydrogen Induced Cracking (HIC)
227-MS-48

Mohammed A. Al-Anezi et al

Saudi Aramco, Saudi Arabia

Linepipe Failures by SOHIC in Sour Hydrocarbon Service
228-MS-49

Satya Narayana Kompally et al

Petroleum Development Oman, Oman

22 Cr Duplex Stainless Steel Cracking in Condensate Service
  ^ Top

NON-METALLICS MATERIALS

References Author Affiliation Paper Title

22-NM-02

Riad El Ferkh

Future Pipe Industries, LLC, Saudi Arabia

Non-Metallic for Oil & Gas Applications
38-NM-03 Abdullah Al-Dossary Saudi Aramco, Saudi Arabia Thermoplastic Liners for Carbon Steel Pipelines
53-NM-04 Ramadan O. saied University of Garyounis, Libya The Influence of Seawater on the Modulus property of Composite Materials at Elevated Temperature
58-NM-05 Peter Grkinic Ulva Insulation Systems Ltd, UK Managing CUI with Nonmetallic Insulation Cladding
64-NM-06 Simon Frost Walker Technical Resources, UK The Importance of Surface Preparation in the Performance of Composite Repairs
65-NM-07 H. Al-Qabah DuPont Performance Elastomers, Saudi Arabia Re-engineering of TEG Pump Sealing using Perfluoroelastomers
210-NM-08 Gokulnath Radhakrishnan et al Maxtube Limited, Dubai, UAE Re-Engineering Downhole Completions while Applying GRE Lining Barriers for Corrosion Protection
84-NM-09 Joan Carter et al DeepFlex. Inc. USA Non-Metallic Flexible Pipe for Onshore and Subsea Applications
86-NM-10 A.G. Gibson et al Center for Composite Materials Engineering, UK Qualification and Test Procedures for Fiberglass Pipe for Oil and Gas Applications
104-NM-11 Matt Green et al Citadel Technologies, USA The Effects of Internal Pressure of a Pipeline During Application of a Nonmetallic Composite Repair
144-NM-12 Mohammed Saleem Saudi Aramco, Saudi Arabia Performance Review of Composites in a Gas Plant Application
148-NM-13 Andreas Dowe et al Evonik Degussa GmbH, Germany Successful Installation of Polyamide 12 Liner by Tight Fit Technology
178-NM-14 Richard Lee et al ESR Technology, UK Integrity Assessment Challenges for Ageing GRP Systems
192-NM-15 R. Marchiori et al Federal University of Catarina, Brazil Improvement of Electrical Conductivity and Tensile Strength in Polymer/Carbon Nanotube Composites
194-NM-16 William Simendinger Nil-Cor, LLC, USA Polymer Matrix Composite Valves for Corrosive Industrial Applications
200-NM-17 Saad Al-Shihaet al Saudi Aramco, Saudi Arabia Qualification and Promoting the Use of Composite Valves in Hydrocarbon Services
211-NM-18 Jim Schmitz United Pipeline Systems, USA High Density Polyethylene Liners for High Temperature and Gaseous Applications
  ^ Top

PROTECTIVE COATINGS
References Author Affiliation Paper Title

80-PC-01

Harthy, Ahmed

PDO, Oman

Approval of Liquid Epoxy Coating as Anticorrosion Coating for Crude Service
15-PC-02 IIftikhar Ahmad et al, Arabian Gulf Oil Company, Libya The Comparative Study of Performance and Application Parameters Used for Internal Lining of Potable Water Pipeline
18-PC-03 Bilal Ghalaini DuPont Products, UAE Engineered Downhole Coating Solutions for Corrosion Control in High Pressure / High Temperature Gas Well Environments
81-PC-04 Svend Johnsen Hempel, Denmark Corrosion Protection with Coatings - Will Pre-Qualification Testing Improve Performance?
49-PC-05 Moufaq Jafar et al Saudi Aramco, Saudi Arabia Effect of Steam-Out Operation on Coatings Performance
66-PC-06 Oluwatoyin Ashiru et al SABIC, Saudi Arabia Mitigating of Corrosion Under Insulation in Plants with Coating Applications
67-PC-07 Mana Mansour Saudi Aramco, Saudi Arabia Effect of Salt Contamination on Coating Performance
106-PC-08 Paul Lenehan A.W. Chesterton, USA Composite Coatings to Protect Metal and Concrete Surfaces
158-PC-09 Hasan Sabri et al Kuwait Oil Company, Kuwait Accuracy of Measurement and Extraction of Soluble salts from Contaminated Substrate
164-PC-10 Ron Campbell et al Belzona, UK Developments in Spray Applied Coatings for the Protection of Process Vessels
166-PC-11 Matthew Fletcher International Paint, UK In-Situ Refurbishment of Tank Linings
184-PC-12 Dado R. Canta Hempel Paints W.L.L., Saudi Arabia Innovative Approaches to Corrosion Protection by Protective Coatings
185-PC-13 Mohammad Reza Shishesaz et al Petroleum University of Technology, Iran Synthesis and Characterization of Corrosion Resistance, Barrier and Adhesion Properties of Polyurethane Clay Nanocomposites
187-PC-14 Amir Farzaneh et al Shahid Bahonar University of Kerman, Iran Evaluation Influence of Anionic Surfactant and Variable Parameters on the Corrosion Resistance of Nickel Electroless Coating in NACL 3.5% by Taguchi Method
191-PC-15 Mahmud Peykari et al Petroleum University of Technology, Iran Preparation of Epoxy-Clay Nanocomposite Coating and Investigation of its Anti-Corrosive Behavior on ASTM A283 Steel
70-PC-16 Michael Magerstädt ROSEN Group, Switzerland Erosion and Corrosion Protection by High Performance Elastomers
143-PC-17 Mohammed Saleem Saudi Aramco, Saudi Arabia Underground Piping Integrity Restoration

231-PC-19

Dik Betzig

Hi-Temp Coatings Technology, USA

Testing Standards for Selection of High Temperature Coatings
  ^ Top

 

WATER TREATMENT & CHEMICAL CLEANING

References Author Affiliation Paper Title

07-WT-01

Taleb, Amina Ramdani et al

Djillali Liabès University, Algeria

Removal of Excess Ions Fluorides of Saharan Brachish Water by Adsorption on Natural Materials
32-WT-02 Dr. Enow Achuo Kima Saudi Aramco, Saudi Arabia The Use of Polyphosphate to Control Red-water Problems in Potable Water Systems
47-WT-04 Dr. Alaa Babylon University, Iraq Design and Construction of a Shallow Depth Settling Water Treatment Plant for Small Communities
51-WT-05 Prof. Hussein Misan University, Iraq Household Water Treatment Design for Iraq Marsh Community
145-WT-08 Manuel Soria GE Technologies, Spain Condensate Metal Transport Reduction Technologies
195-WT-09 Mohammed F. Al-Hajri Saudi Aramco, Saudi Arabia The New Water Treatment Program in Abqaiq NGL Cooling Towers
27-WT-10 Riyadh A Al-Harbi Saudi Aramco, Saudi Arabia Assessing HRSG Internal Tubes Conditions
33-WT-11 Arif Jaffer Alkhorayef Petroleum Company, Saudi Arabia Corrosion Mitigation in Steam Plants
147-WT-12 Shereif Alsayed GE Water & Process Technologies, UAE Assessment of Needs and Evaluation of an Innovative Water Treatment Approach for Open Evaporative Seawater Cooling Systems
172-WT-13 Garry Laxton et al Baker Hughes, USA Time and Costs and Avoid Environmental Risk Associated with Cooling Water Process Hydrocarbon Leaks
  ^ Top

 

STUDENTS POSTERS

References Author Affiliation Paper Title

09-SP-01

Amuda, Muhammed Olawale Hakeem

International Islamic University, Malaysia

Effect of Cryogenic Weld Cooling on Sensitization in AISI 430 Ferritic Stainless Steel Welds
103-SP-02 Toafri et al University of Algeria, Algeria L-Cysteine as Environmentally Friendly Corrosion Inhibitor for XC18 Carbon Steel in Acidic Medium
146-SP-03 Aysun Ayday Sakarya University, Turkey Effect of Plasma Electrolytic Oxidation Treatment on the Corrosion Properties of Aluminum 6060
59-CR-08-P-04 Philip Sillman et al Nalco Ltd., UK Practical Field Applications & Guidelines for Using Overhead Simulation Models
179-CR-22-P-05 Alaa-Eldin Hassanein et al Halcrow Consulting Engineers & Architects Ltd., Qatar Concrete Specification and Enhancement Techniques for New Construction in the Gulf
113-MS-21-P-06 Abdulhafiz Abdulsalam Salem et al GNDEC Ludhiana, India Study the Effect of Sensitization in GTAW of Stainless Steel
152-MS-34-P-07 Balraj Nagesh Al Hoty Stanger Ltd. Co, Saudi Arabia Case Study of the Pitting Corrosion of the SS 312 Type 304 Grade Pipes and Fittings Used for Flow of Acetic Anhydride Solution
40-MS-01-P-08 Khalid Al-Hydary SABIC, Saudi Arabia Intelligent Inspection Skills
85-CP-04-P-09 Zia Chaudhary et al SABIC, Saudi Arabia Cathodic Protection of Seawater Reinforced Concrete Structures
62-CP-07-P-10 Calvin R. Pynn Aegis Technical Systems LLC, UAE  Cathodic Protection of Reinforced Concrete Foundation Piles
165-CR-08-P-11 Yasir Younas et al University of Leoben, Austria Problems in Quantification of Pitting Corrosion
137-CR-19-P-12 Shouwen Shen et al Saudi Aramco, Saudi Arabia Chemical Composition Determination of Black Powder Samples by XRD and XRF
215-PC-18-P-13 Abdulsalam Khashan Swadi et al Ministry of Science and Technology, Iraq Effect of Bioceramic Coatings on Corrosion Behavior for Type 316L SS Used in Orthopedic Applications
216-CR-39-P-14 Murtdha A. Alsaaidy et al Ministry of Science and Technology, Iraq Effect of Ellagic Acid on Bio Corrosion Behavior of Surgical Implants
  ^ Top

PLENARY LECTURES

References Author Affiliation Paper Title

06-PL-01

Dr. Brian Cane

(TWI), UK

Operational Excellence Through Asset Management
13-PL-02 Jim Palmer Intertek, UK Role of R&D in Mitigating Corrosion
24-PL-03 Ned Niccolls Chevron, USA Corrosion Management for Reliable Facilities
  ^ Top

 

WORKSHOPS
References Author Affiliation Paper Title

23-WS-01

Dr. Xinming Hu et al

University of Leeds, School of Mechanical Engineering, UK

Total Integrity Management – Linking Corrosion and Erosion-Corrosion Research to Industry’s Needs
46-WS-03 Dr. Gareth John Intertek/CAPCIS, UK Advances in Corrosion Monitoring
42-WS-02 Dr. Cheolho Kang DNV, USA Determination/Control of Multiphase Flows and Flow Accelerated Corrosion
208-WS-04 Richard Lee et al ESR Technology Ltd, UK NDT in Nonmetallic Materials
209-WS-05 Mohammed Anezi Saudi Aramco, Saudi Arabia Proper Procurement Methodology of Sour Service Materials
  ^ Top
Author's Paper Instruction is available

Paper Format for Authors is available

Presentation Instruction for Authors is available

Please contact the Technical Committee Chairman for any questions related to the abstracts and technical papers.

Mr. Husain M. Al-Mahrous
Technical Committee Chairman
P. O. Box 9680, Dhahran 31311,
Saudi Aramco, Saudi Arabia
Tel: +966-3-876-0196
Fax: +966-3-876-0320
E-mail: husain.mahrous@aramco.com

 

   

 
 
 
Power point presentation due:
January 20, 2010
Workshops:
February 14, 2010
Opening Ceremony
at 7:00 pm
February 14, 2010
Conference & Exhibition
February 15-17, 2010